Zebra WS50 Android Wearable Computer

UNPARALLELED FUNCTIONALITY IN THE WORLD’S SMALLEST ALL-IN-ONE ANDROID ENTERPRISE-CLASS WEARABLE MOBILE COMPUTER

Every task worker without mobile access to relevant information is forced to take more steps and more time to complete tasks, eroding operational efficiency. Now, connecting your disconnected workers is easy with Zebra’s WS50 — the world’s smallest Android enterprise-class wearable mobile computer. It’s rugged, modular and at home everywhere — in manufacturing plants and warehouses to retail stores and hotels.

TRUE ‘NO-HOST’ ONE-PIECE WEARABLE

When it comes to data capture, this all-in-one device can do it all. No need for a two-piece wearable solution to capture the data you need — plus it’s a voice communication device. Choose an integrated barcode scanner or camera. And all models support push-to-talk. The result? True convergence — single-device simplicity.

WEAR IT YOUR WAY WITH MODULAR MOUNTING OPTIONS

With three different wearing styles, the adaptable WS50 is ideal for virtually any task worker in practically any industry. The WS50 can be worn on a wrist, two fingers or the back of the hand. And no matter which wearing style you prefer, the lightweight and ergonomic design is comfortable and hands-free.

ALL THE KEY FEATURES OF A FULL-SIZE MOBILE COMPUTER

The WS50 is small in size but big in features, delivering everything your disconnected workers need to increase efficiency and productivity. Capture barcodes or high resolution photos. Enable workforce-wide collaboration with push-to-talk. The rugged design is ready for work. Automate workflows with programmable buttons. The AMOLED colour display provides superior readability, and its low power consumption extends battery run times. And more.

WS50 Android Wearable Computer

DESIGNED FOR MAXIMUM FLEXIBILITY

Connect your disconnected task workers with Zebra’s WS50 — the world’s smallest all-in-one Android enterprise-class wearable mobile computer. It’s rugged, modular and at home everywhere — from manufacturing and warehousing to retail and hospitality.

Dimensions

Wrist (device): 2.44 in.L x 2.32 in.W x 0.71 in. D
62 mm L x 59 mm W x 18 mm D 

Wrist (with mount): 2.9 1in. L x 2.51 in. W x 0.751 in.D
74 mm L x 64 mm W x 19 mm D

Converged: 2.52 in. L x 2.44 in. W x 1.10 in. D
64 mm L x 62 mm W x 28 mm D

Operating System

Android 11 AOSP

Drop Spec

Wrist : 4 ft./1.2 m drop to concrete per MIL-STD 810G across opperating temperature 

Converged: 6 ft./1.8 m drop to tile over concrete

per MIL-STD 810G across opperating temperature 

Weight

Wrist (device): 2.89 oz./82 g

Wrist (with mount): 3.77 oz./107 g

Converged: 4.48 oz./127 g

 

CPU

Qualcomm SDW4100, Quad-Core, 2.0 GHz

 

Data Capture

Scanning: SE4770: 1D/2D standard range omni-directional imager

Camera: 13 MP with Flash – Wrist Version

Industry Use

Transportation

Retail

Manufacturing

Warehousing

hospitality

Hospitality

Request a Repair

If you have a problem with your Zebra WS50 then pleaase use the link below to get an online RMA

Request a Quote

Do you need a number of terminals. Let us know the hardware configuration and we’ll get back to as soon as possible.

12 + 15 =

Request Help

If you nned any technical assistance regarding your terminals then please dont hesitate to contact us.

14 + 5 =

Knowledge Base – Zebra WS50

Soft Reset - Warm Boot

WS50 Soft Reset – Warm Boot

Perform a soft reset if applications stop working.
1. Press and hold the Power button until the menu appears.
2. Touch Restart.
The device reboots.

Hard Reset - Cold Boot

WS50 Hard Reset – Cold Boot

CAUTION: Performing a hard reset with a microSD card installed in the device may cause damage or data corruption to the microSD card. All un-saved data is lost after performing a hard reset.


Perform a hard reset if the device stops responding.


1. Simultaneously press the Power, Center Scan and Trigger buttons for at least four seconds.
2. When the screen turns off, release the buttons.
The device reboots

Enterprise Reset

WS50 Enterprise Reset

An Enterprise Reset erases all user data in the /data partition, including data in the primary storage locations (/sdcard and emulated storage).
Before performing an Enterprise Reset, provision all necessary configuration files and restore after the reset.
Perform Enterprise Reset using ADB.

Downloading the Enterprise Reset Package
To download the system update package:
1. Go to the Zebra Support & Downloads web site, www.zebra.com/support.
2. Download the Enterprise Reset file to a host computer. 

Using microSD Card

It is strongly recommended that prior to use, you must format the microSD card on the device.
1. Copy the Enterprise Reset zip file to the root of the microSD card.
• Copy the zip file to a microSD card using a host computer (see USB Communication for more  information) and then installing the microSD card into the device (see Replacing the microSD Card for more information).
• Connect the device with a microSD card already installed to the host computer and copy zip file to the microSD card. See USB Communication for more information. Disconnect the device from the host computer.
2. Press and hold the Power button until the menu appears.
3. Touch Reboot.
4. Touch OK. The device resets.
5. Press and hold the Trigger button until the device vibrates. The System Recovery screen appears.
6. Press the Up and Down buttons to navigate to apply from sdcard.
7. Press the Enter button.
8. Press the Up and Down buttons to navigate to apply from adb.
9. Press Enter.
10.Use the Up and Down buttons to navigate to Full OTA Package or Diff OTA Package.
11.Press the Enter button.
12.Use the Up and Down buttons to navigate to the Enterprise Reset file.
13.Press the Power button. The Enterprise Reset occurs and then the device returns to the Recovery screen.
14.Press the Power button.

Using ADB

To perform an Enterprise Reset using ADB:

1. On the device, swipe down from the Status bar to open the Quick Access panel and then touch .
2. Touch System > Developer options.
3. Slide the switch to the ON position.
4. Touch USB Debugging. A check appears in the check box. The Allow USB debugging? dialog box appears.
5. Touch OK.
6. On the host computer, open a command prompt window and type: adb devices. The following displays: List of devices attached XXXXXXXXXXXXXXX device (where XXXXXXXXXXXXXXX is the device number). NOTE: If device number does not appear, ensure that ADB drivers are installed properly.
7. Type: adb reboot recovery
8. Press Enter. The System Recovery screen appears.
9. Press the Up and Down buttons to navigate to apply from adb.
10.Press Enter.
11.Use the Up and Down buttons to navigate to Full OTA Package or Diff OTA Package.
12.Press Enter.
13.On the host computer command prompt window type: adb sideload where: = the path and filename of the zip file.
14.Press Enter. The Enterprise Reset package installs and then the Recovery screen appears.
15.Press the Enter button to reboot the device.

Factory Reset

WS50 Factory Reset

A Factory Reset erases all data in the /data and /enterprise partitions in internal storage and clears all
device settings. A Factory Reset returns the device to the last installed operating system image. To revert to a
previous operating system version, re-install that operating system image. See Performing a System Update
for more information.
Downloading the Factory Reset Package
To download the Factory Reset package:
1. Go to the Zebra Support & Downloads web site, www.zebra.com/support.
2. Download the appropriate Factory Reset file to a host computer.

Using microSD Card

1. Copy the Factory Reset zip file to the root of the microSD card.
• Copy the zip file to a microSD card using a host computer (see USB Communication for more information) and then installing the microSD card into the device (see Replacing the microSD Card for more information).
• Connect the device with a microSD card already installed to the host computer and copy zip file to the microSD card. See USB Communication for more information. Disconnect the device from the host computer.

2. Press and hold the Power button until the menu appears.
3. Touch Reboot.
4. Touch OK. The device resets.
5. Press and hold the Trigger button until the device vibrates. The System Recovery screen appears.
6. Press the Up and Down buttons to navigate to apply from sdcard.
7. Press the Enter button.
8. Use the Up and Down buttons to navigate to Full OTA Package or Diff OTA Package.
9. Press the Enter button.
10.Use the Up and Down buttons to navigate to the Factory Reset file.
11.Press the Power button. The Factory Reset occurs and then the device returns to the Recovery screen.
12.Press the Power button.

Using ADB

To perform an Factory Reset using ADB:
1. On the device, swipe down from the Status bar to open the Quick Access panel and then touch .
2. Touch System > Developer options.
3. Slide the switch to the ON position.
4. Touch USB Debugging. A check appears in the check box. The Allow USB debugging? dialog box
appears.
5. Touch OK.
6. On the host computer, open a command prompt window and use the adb command:
adb devices.
The following displays:
List of devices attached
XXXXXXXXXXXXXXX device (where XXXXXXXXXXXXXXX is the device number).
NOTE: If device number does not appear, ensure that ADB drivers are installed properly.
7. Type:
adb reboot recovery
8. Press Enter. The System Recovery screen appears.
9. Press the Up and Down buttons to navigate to apply from adb.
10.Press Enter.
11.Use the Up and Down buttons to navigate to Full OTA Package or Diff OTA Package.
12.Press Enter.