Honeywell ScanPal EDA51K Mobile Computer

Honeywell ScanPal EDA51K
Honeywell ScanPal EDA51K

Honeywell ScanPal EDA51K Handheld Computer

The durable Honeywell ScanPal EDA51K helps businesses automate and error-proof mission-critical workflows in light-duty warehouses, distribution centers, retail and delivery with low up-front costs. The device provides users with reliable network connectivity and a high-performance scanner for maximum productivity indoors and out.
The EDA51K adds a keyboard to the field-tested, highly popular EDA51 computer, based on the Qualcomm® Snapdragon™ 1.8 GHz octa-core processor and Android 10 (Q).
With up to 4 GB of RAM and 64 GB of flash memory, the EDA51K supports business environments that run many software applications. Available with Honeywell’s best-in-class N6703 scan engine, the EDA51K provides high tolerance to motion and poor-quality barcodes to simplify barcode capture.
The powerful, 13-megapixel color camera captures high quality images in pictures in dim environments. Rated IP65 for ingress protection, the EDA51K is dust and water-resistant and suitable for use in the elements.
Tested to survive 500 half-meter tumbles and multiple 1.5 m (5 ft) drops to concrete across the operating temperature range, the EDA51K is designed to last.
Lightweight and responsive, the EDA51K is equipped with a 4-inch touch screen and numeric keypad for data-input flexibility. Improved hard keys eliminate legend wear and include backlighting.
Scan buttons on each side of the mobile computer enable both left-handed and right-handed users, ensuring an excellent user experience.

Honeywell ScanPal EDA51K Specifications

FEATURES

  • Camera
  • Yes
  • Housing Grade
  • Standard
  • Features
  • Rugged

DIMENSIONS

  • Overall Dimensions
  • 164mm x 73 mm x 24.5 mm (6.5 in x 2.9 in x 1.0 in)

SCANNING SPECIFICATIONS

  • Decode Capability
  • Honeywell N6703 Slim Imager (1D/2D barcode symbologies)

NETWORK

  • Bluetooth Specifications
  • Bluetooth Class 4.2
  • GPS Specifications
  • GPS (WWAN only) Supported Protocols: Simultaneous receiver support for GPS, GLONASS, and BeiDou
  • WWAN Specifications
  • WWAN Radio:
  • GSM/EDGE: Bands 2, 3, 5, 8
  • WCDMA: Bands 1, 2, 4, 5, 6,8, 9, 19
  • FDD-LTE: Bands 1, 2, 3, 4, 5, 7, 8, 9, 12,13,17,19,20,25,26,28,30,66
  • TDD-LTE: Bands 38, 39, 40, 41
  • WLAN Specifications
  • WLAN (Wi-Fi Alliance certified) :
  • IEEE 802.11 a/b/g/n/ac
  • WLAN Security: OPEN, WEP, WPA/WPA2-PSK, PEAP
  • WLAN Supported EAP:
  • TLS,TTLS, SIM, AKA

SOFTWARE & FIRMWARE

  • Operating System
  • Android 10

MEMORY & DATA

  • Memory
  • 3G RAM/32G Flash; 4G RAM/64G Flash

HARDWARE

  • Processor
  • Qualcomm 1.8GHz octa-core
  • Display Resolution
  • 480×800
  • Display Size
  • 4 inch
  • Scan Engine Range
  • Standard
  • Scan Engine Model
  • Honeywell N6703 Slim Imager (1D/2D barcode symbologies)

ELECTRICAL

  • Battery Capacity
  • 3.8 V, 4,000 mAh, removable
  • Battery Type
  • Li-Ion

ENVIRONMENTAL

  • Operating Temperature
  • – 10 – 50 °C
  • 14 – 122 °F
  • Storage Temperature Range
  • – 4 – 158 °F
  • – 20 – 70 °C
  • Operating Humidity
  • 10 – 90 % (non-condensing)

STANDARDS & APPROVALS

  • Drop Specifications
  • Multiple 1.5 m (4 ft) drops to concrete at room temperature
  • Durability
  • Environmental Sealing: IP65
  • Electrostatic Discharge (ESD):
  • ±8 kV direct; ±12 kV air

OTHERS

  • Camera Position
  • Rear Camera: 13-megapixel color camera
  • Keyboard
  • Yes

SERVICE TERMS

  • Warranty Duration
  • One-year factory warranty

Industry Use

field mobility

Field Mobility

warehousing

Light Warehouse

Retail

ScanPal EDA51K Handheld Computer Data Sheet
ScanPal EDA51K Mobile Computer Quick Start Guide
User Guide: ScanPal EDA51K Mobile Computer (EDA51K-A-EN-UG-01 Rev B)
Honeywell ScanPal EDA51K Product Page

Request a Repair

If you have a problem with your Honeywell EDA51K then pleaase use the link below to get an online RMA

Click Here

Request a Quote

Do you need a number of terminals. Let us know the hardware configuration and we’ll get back to as soon as possible.

2 + 9 =

Request Help

If you need any technical assistance regarding your terminals then please dont hesitate to contact us.

14 + 1 =

Knowledge Base – Honeywell ScanPal EDA51K

Soft Reset - Warm Boot

Honeywell ScanPal EDA51K  Soft Reset – Warm Boot

Perform a soft reset if applications stop working.
1. Press and hold the Power Button until the options menu appears.
2. Select Restart or Power > Restart depending on your computer model.

The device reboots.

Hard Reset - Cold Boot

Honeywell ScanPal EDA51K Hard Reset – Cold Boot

CAUTION: Performing a hard reset with a microSD card installed in the device may cause damage or data corruption to the microSD card. All un-saved data is lost after performing a hard reset.

To restart the computer if the touch panel display is unresponsive:


• Press and hold the Power Button for approximately 8 seconds until the computer restarts.

Enterprise Reset

Honeywell ScanPal EDA51K Enterprise Reset

You can perform an Enterprise data reset if a reboot did not improve the condition and all other troubleshooting methods have not been resolved the issue. This method provides a clean configuration for troubleshooting by erasing all the data from the internal shared storage location on the mobile computer. Data is not erased from the IPSM card location.

Caution: An Enterprise data reset results in data loss, only perform this procedure if all other recovery methods have failed. All personal content is erased including, but not limited to emails, pictures, contacts, Google account information, system settings, and application settings.

Note: This method of recovery may not be available if your system administrator has set policies to prevent the reset use.

Before you begin

  • If you recently reset your Google Account password, wait 24 hours before performing an Enterprise data reset.
  • Make sure you have your screen lock password, PIN, or pattern if you activated one. You will need this to reset the mobile computer.
  • If you have a Google Account, backup your data and settings to your Google Account so you can restore them if required.
  • Connect the computer to an external power source or make sure you have a full battery charge.
  • Make sure you have an Internet connection.

Enterprise Data Reset the Mobile Computer

  1. Swipe up from the bottom of the home screen to access all applications.
  2. Select Settings > System > Reset Options.
  3. Tap Enterprise Data Reset.
  4. Tap Erase All Data.
  5. If prompted, type your screen lock security patter, PIN, or password, and tap Next.
  6. Tap Erase Everything. A message appears informing you an Enterprise Data Reset is being performed.

Terminal will reboot.

Factory Reset

Honeywell ScanPal EDA51K Enterprise  and Factory Reset

A full factory reset should only be performed if you have exhausted all other troubleshooting options. This method reverts the mobile computer back to the factory state by erasing all data in Internal shared storage and the IPSM Card storage locations on the mobile computer.

Caution: A full factory reset results in data loss, only perform this procedure if all other recovery methods have failed and have no other option. All personal content is erased including, but not limited to emails, pictures, contacts, Google account information, system settings, and application settings.

Note: This method of recovery may not be available if your system administrator has set policies to prevent the reset use.

Before you begin

  • If you added a Google Account to the mobile computer, make sure you have your Google username and password associated with the computer. If you do not have the username and password, you will not be able to use the mobile computer after the reset. This is a security measure that prevents unauthorized users from using the device if they try a Full factory reset.
  • If you did not add a Google Account to the mobile computer, the extra security level is not enabled, and you will not need a Google username and password.
  • If you recently reset your Google Account password, wait 24 hours before performing an Enterprise data reset.
  • Connect the computer to an external power source or make sure you have a full battery charge.
  • Make sure you have an Internet connection.

Factory Reset the Mobile Computer – From the Operating System

  1. Swipe up from the bottom of the home screen to access all applications.
  2. Select Settings > System > Reset Options.
  3. Tap Erase All Data (Factory Reset)
  4. Tap Reset Phone.
  5. If prompted, type your screen lock security patter, PIN, or password, and tap Next.
  6. Tap Erase Everything. A message appears informing you an Enterprise Data Reset is being performed.

Terminal will reboot.

Factory Reset the Mobile Computer – From the Bootloader/Recovery Mode

  1. Press and hold the Power Button.
  2. From the menu that will appear on the screen select to Power Off.
  3. With the device off press and hold the Volume Down Button, while doing so press the Power Button.
  4. In the bootloader, select “Recovery”.
  5. While in recovery mode, press the Volume Down Button for 10 seconds to see all options.
  6. Select “Wipe data/factory reset” and press the Power Button.
  7. Select “Reboot System now” and press the Power Button.

Terminal will reboot.

Honeywell ScanPal EDA51K SKU’s

  • EDA51K-0-B961SQGRK EDA51K, WLAN, 4G/64G, 13MP camera, N6703 engine, Android with GMS, 4000 mah battery, ROW.
  • EDA51K-1-B931SQGRK EDA51K, WWAN, 3G/32G, 13MP camera, N6703 engine, Android with GMS, 4000 mah battery, ROW.
  • EDA51K-1-B961SQGRK EDA51K, WWAN, 4G/64G, 13MP camera, N6703 engine, Android with GMS, 4000 mah battery, ROW.
  • EDA51K-0-B931SQGRK EDA51K, WLAN, 3G/32G, 13MP camera, N6703 engine, Android with GMS, 4000 mah battery, ROW.